Silicon Solution: 10,000 ppm
Provides silicon, required for cellular reproduction in poriferans and several important classes of marine phytoplankton.
Active Components: Potassium silicate, hydrated.
1 mL per 0.941 gallons (3.560 L), provides 2.809 ppm [Si].
Reference Standard [Si]:
2.809 ppm (S=35.0)
3.210 ppm (S=40.0)
Determine [Si] in system prior to commencing dosing.
In established systems, increase [Si] up to 5% of existing ionic value daily, until desired value or reference standard is reached.
Recommended initial dosage rate is 1 drop (0.05 mL) per 50 gallons (189.27 L)
Rate of silicon depletion is unique to each independent recirculating ecosystem, and is influenced by biological, chemical, and physical factors, all of which are dynamic. Therefore, there is no standard dosage which can be prescribed for any two independent systems, and weekly ICP analysis is suggested in order to monitor the [Si] and avoid overdosing. It is not recommended to establish a dosing rate for a 7-day period of time and continue with that dosing regimen for longer than that period, as overdose will likely occur.
To obtain accurate silicon values, Captiv8 Aquaculture recommends ICP conducted by Reef Masters.
Keep out of reach of children and unauthorized persons. Avoid contact with skin, eyes, and mucous membranes. Store in a cool, dry location away from sunlight.
The following discussion and recommendations are made expressly for recirculating systems. Laboratory application may proceed as required by study objectives. Review Disclaimer at bottom of page prior to using this or other Captiv8 Aquaculture product(s).
The rate of ion depletion due to cohort uptake is driven by various chemical and physical factors which are unique to each independently-operating recirculating system, and which are constantly changing as cohort biomass increases and decreases.
Monitoring (daily) the system's concentrations of element(s) provided by this formulation and referencing apparent changes in cohort biomass will enable User to adjust dosing of this formula to suit system requirements, improving overall effectiveness and resulting in less wasted solution.
Recommended is diluting an appropriate volume of this solution into a larger volume of purified water (with a purity of at least 98%), and applying this diluted solution to the system with an automated dosing system. Dosing frequency is directly proportional to stability of ionic concentrations and, resultantly, continuous cohort biomass growth. A 1 - 10 s drip interval provides adequate ionic stability, and is recommended.
If no automated dosing system is available, then apply solution manually each day. Dosing frequency is directly proportional to stability of ionic concentrations and, resultantly, continuous cohort biomass growth. Dosage volume per 24 h is divided by the dosing frequency*.
It is not recommended that this formulation be dosed fewer than four times weekly.
Reference Standards: 1 mL Isol8 Si diluted in 26.4 gal. (100 L) water yields 100 μg/L increase of [Si].
To calculate required solution volume for known parameter differential:
Multiply net water volume (L) by actual [Si] (mg/L).
Multiply net water volume (L) by desired [Si] (mg/L).
Subtract product of Step 1 from product of Step 2.
Divide difference of Step 3 by 0.5. Answer is drops sol’n required to achieve desired [Si] in situ.
Recommended: Do not increase parameter concentration by more than 5% per 24 h period in systems with existing cohorts. Aside from emergencies (e.g. excessive nutrient content in an active system, greatly depressed or excessive salinity, etc.), gradual changes in water composition are generally tolerated better by aquatic organisms than are rapid changes.
*Example: If dosage volume per 24 h = 1 mL and dosing frequency = 4, then dose 0.25 mL per event.
Notice: It is not possible to eliminate all risks associated with the use, handling, or storage of this product. Ineffectiveness, injury to crops and/or livestock, or other unintended consequences may result due to factors outside the control of Captiv8 Aquaculture or the seller. Buyer or user shall assume all such risks. For details, go to Terms and Conditions. Consult SDS before use.
Disclaimer: Captiv8 Aquaculture warrants that this product conforms to the description, and is reasonably fit for the purposes described, on its label. In no event shall Captiv8 Aquaculture or the seller be held liable for any incidental, consequential, or special damages, loss, or injury, including, without limiting, lost profits, resulting from the use or handling of this product. The exclusive remedy of the buyer or user for all claims shall be the return of the purchase price of this product. Express and implied warranties are disclaimed. Captiv8 Aquaculture does not authorize any agent or representative to make any other warranty, guarantee, or representation concerning this product.
For sale by Captiv8 Aquaculture and its authorized dealers, only.